Textile needle loom
Probably the most complicated piece of equipment I’ve designed and built to date would have to be a textile needle loom for Goodrich. This machine is fully instrumented with position sensors, accelerometers, load cells, etc. for characterization of a textile needling process. Every parameter from speed and feed to force and distance is adjustable real time. This was definitely the most challenging mechanical design I have completed. I modeled the entire project in Solidworks to verify the design, and had over one hundred custom parts machined.
Leave a Reply
What I do
Recent Posts
- Pressure mapping with DIY foam load cells
- SMS remote control
- Flatbed scanner panoramic camera
- DIY Router table
- Build a 9-digit Pulse Counter for under $20
- Trailer turn signal update
- PCB layouts and schematics for my CNC
- Build a spot welder from a battery charger
- MAX4173 Current sense amplifier
- LED backlit desk sign
Archives
- August 2010 (1)
- July 2010 (3)
- April 2010 (2)
- March 2010 (2)
- January 2010 (2)
- December 2009 (2)
- October 2009 (2)
- September 2009 (1)
- August 2009 (15)